Skew specifications all models
|
Category |
Specification |
|
Skew: all vertical lines are parallel to the left edge of the media. |
3.0 mm (0.12 inch) over 250 mm (9.85 inches) length (0.8 percent) for cut-sheet media (except for A5 size) 3.3 mm (.13 inch) over 220 mm (8.66 inches) length (1.5 percent) for envelopes, postcards, and A5 size cut-sheet media. 1.65 mm (0.06 inch) over 190 mm (7.48 inches) width for cut-sheet media (leading-edge skew) |
|
Category |
Specification |
|
First line/leading edge skew: the distance of the first scan line from the leading edge of the media. |
4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media. 4.23 mm (0.16 inch) ± 2.5 mm (0.09 inch) for thick media over 105-g/m2 (28 pounds). 15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and postcards. |
|
Left margin: the distance of the left-most vertical line (first two dots of each scan line) from the left edge of the media. |
4.23 mm (0.16 inch) ± 2.0 mm (0.07 inch) for cut-sheet media. 15.0 mm (0.59 inch) ± 3.5 mm (0.13 inch) for envelopes and postcards. |
|
Parallelism |
All vertical lines must be parallel within an absolute value of 2 percent (1.5 mm [0.05 inch] over a 250 mm [9.85 inch] length for cut-sheet media). |
|
HP LaserJet 3030 fax capabilities Table 1-8. HP LaserJet 3030 fax capabilities | |
|
Category |
Specification |
|
Fax transmission speed |
3 seconds/page (ITU-T Test Image #1) |
|
Right/left margins for printed pages |
6.3 mm (0.25 inch) |
|
Top/bottom margins for printed pages |
5.08 mm (0.2 inch) |
|
Fax compatibility |
ITU Group 3; ECM |
|
Fax coding schemes |
MH, MR, and MMR |
|
Modem speed |
Up to 33,600 bits per second (bps) |
|
Speed dialing |
Yes |
|
Distinctive ring detect |
Yes |
|
Fax resolution (standard) |
203 by 98 dpi |
|
Fax resolution (fine) |
203 by 196 dpi |
|
Fax resolution (superfine) |
300 by 300 dpi (no halftone) |
|
Fax resolution (photo) |
300 by 300 dpi (halftone enabled) |
|
Fax page storage |
Up to 110 slerexe pages |
Post a comment