About This Manual
This is a field service maintenance manual. It is designed so that you can quickly locate maintenance information.
Taking a systematic approach to maintenance tasks will help you restore the printer to operation as quickly as possible:
1. Locate the procedure or information you need. (Refer to the Table of Contents or the Index.)
2. Read the entire procedure before you do it.
3. Gather the parts and tools you will need.
4. Make sure you understand all safety notices before you start a task. Notes and notices are defined below.
Notes and Notices
For your safety and to protect valuable equipment, read and comply with all information highlighted in notes and notices. The hand symbol of a notice indicates the kind of information it contains:
... . Warning messages call attention to situations that could hurt you.
Warning
Caution
Caution messages indicate procedures which, if not observed, could result in damage to equipment.
., Notes contain important information set off from the text.
Note
Printing Conventions in This Manual
Control panel keys and indicators are highlighted in bold print. Example: Press the CLEAR key, then press the ON LINE key.
LCD (Liquid Crystal Display) messages are set off by quotation marks (""). Example: Press the ON LINE key. "OFF LINE" appears on the LCD.
Key combinations are denoted by the + (plus) symbol. Example: Press a + ▼.
means Press the a (UP) key and the ▼ (DOWN) key at the same time.
Related Documents
This manual does not explain how to operate or configure the printer. Printer setup, operation, and configuration are covered in other manuals that accompany each model:
• LP Series Printers: User's Guide (Part Number 165018-001PX)
Explains how to configure the printer and provides simple troubleshooting guidelines.
• LP Series Printers: Cabinet and Pedestal Model Installation Instructions (Part Number 165019-001PX)
Explains how to set up the printer for operation.
• LP Series Printers: Quick Reference Guide (Part Number 165014-001PX)
Describes the keys on the control panel and provides quick reference information on daily printer operations such as loading paper and replacing ribbons.
• LP Series Printers: Technical Reference Manual (Part Number 165015-001PX)
Describes the host control codes and character sets for the LinePrinter Plus® and PCL®-II emulations.
• LP Series Printers: QMS Code V Technical Reference Manual (Part Number 165017-001PX)
Explains how to write graphics programs using the optional QMS Code VII Printronix® emulation. This graphics programming language allows the user to create and store forms, generate logos, bar codes, and expanded characters, create graphic images, and merge graphics with alphanumeric data as a document is printed.
Post a comment