User message Warning Incorrect type of tubes system
This error message appears if the electrical connector of the Ink Tubes System is not connected correctly (especially after the Tubes have been replaced). Other causes are defective EEROM in the Ink Tubes System or ISS PCA.
■ Switch OFF the printer, open the rear left cover and connect or re-connect the Electrical Cable (the colored flat cable) that is connected to the rear of the Ink cartridge Tube Connector.
■ If the problem persists, check that the Electrical Cable is connected correctly to the ISS PCA.
■ Replace the ISS PCA (^ Page 8-86) or the Ink Tubes system (^ Page 8-25).
Post a comment