Transparencies
• The default output for all transparencies is the top output bin for all HP Color LaserJet 8550 printer models.
• The printer's internal color settings are optimized for the best color quality if Transparency is selected as the media type in the printer driver. Using other media type settings will result in less accurate colors.
• The printer only supports transparencies of 5 mils (0.13 mm) in thickness.
• To prevent damage to the printer, transparencies must be able to withstand the printer's fusing temperature (approximately 190° C or 374° F).
• Handle transparencies by the edges. Oil from your fingers can be deposited on the transparencies, causing print quality problems.
• Allow printed transparencies to cool before handling to prevent curling.
WARNING! Allow transparencies to cool before handling to prevent burns.
Post a comment