Front view shown with optional Tray 3
|
1 |
Output bin |
|
2 |
Printer control panel |
|
3 |
Front door |
|
4 |
Tray 2 (250 sheets) |
|
5 |
Tray 1 (single sheet priority feed slot) |
|
6 |
Tray 3 (optional; 250 sheets) |
Back and side view
|
1 |
On/off switch |
|
2 |
Power connection |
|
3 |
Engine test button access door |
|
4 |
Access door |
|
5 |
Dust cover |
|
6 |
HP built-in internal print server for connecting to a 10/100Base-T network |
|
7 |
USB connection |
|
1 |
Transfer belt (ETB) |
|
2 |
Print cartridges |
/\ CAUTION Do not place anything on the transfer belt , which is located on the inside of the front door. Otherwise, the printer may be damaged, adversely affecting print quality.
Model and serial number location
The model number and serial numbers are listed on identification labels located on the rear of the printer. The model number is alphanumeric, such as Q6455A, for the HP Color LaserJet 2600n printer. The serial number contains information about the country/region of origin, the printer version, production code, and the production number of the printer.
- Figure 1-5 Model and serial number information
Control panel Understanding supplies status
The supplies gauges show the consumption levels of print cartridges (black, yellow, cyan, and magenta).
Black, yellow, cyan, and magenta supplies status gauges
A ? appears instead of the consumption level when the level is not known. This can occur in the following circumstances:
■ Missing cartridges
■ Incorrectly placed cartridges
■ Cartridges with an error
■ Some non-HP cartridges
The supplies gauge appears whenever the printer shows the Ready state with no warnings. It will also appear when the printer shows a warning or error message concerning a print cartridge or multiple supplies. If a supply is empty, the gauge will flash.
Understanding printer status Cancel Job button
■ When the Ready light is blinking, pressing © (Cancel Job) cancels the current job.
■ When a supplies status gauge is blinking and the Attention light is on (indicating that a non-HP supply has been installed), pressing H (Select) allows you to continue printing.
CAUTION You might not receive any indication when a non-HP supply is empty. For more information about using non-HP print cartridges, see HP policy on non-HP supplies. If you continue printing after the supply is empty, damage to the printer can occur. See Hewlett-Packard limited warranty statement.
Post a comment